Ortofon 2MR Red Elliptical Diamond MM Cartridge - Special version for Rega

Price includes postage with tracking and insurance.

For a short time only, order a cartridge and receive a mirrored alignment protractor with your order. See image.

The Ortofon 2MR systems feature, specially designed cartridge housings, is tailored for turntables and tonearms such as Rega or Dual with an adapter plate, meeting their low profile cartridge requirements. With the low-profile cartridge housing, they can be screwed directly under the tonearm without the need for modifications or spacers on the tonearm. This allows for quick and easy installation with just two screws. Our free mirrored alignment protractor takes the guesswork out of installation.

Price includes postage with tracking and insurance.

Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV

Channel balance at 1 kHz - 1.5 dB

Channel separation at 1 kHz - 22 dB

Channel separation at 15 kHz - 15 dB

Frequency response - 20-20.000 Hz + 3 / - 1 dB

Tracking ability at 315Hz at recommended tracking force - 70 µm

Compliance, dynamic, lateral - 20 µm/mN

Stylus type - Elliptical

Stylus tip radius - r/R 8/18 µm

Tracking force range - 1.6-2.0 g (16-20 mN)

Tracking force, recommended - 1.8 g (18 mN)

Tracking angle - 20°

Internal impedance, DC resistance - 1.3 kOhm

Internal inductance - 700 mH

Recommended load resistance - 47 kOhm

Recommended load capacitance - 150-300 pF

Cartridge colour, body/stylus - Black/Red

2M standard and 2M Verso cartridges weight - 7.2 g

Replacement stylus unit - 2M Red (interchangeable with 2M Blue and 2M Silver)